Gravel calculator in tonnes
Enter the area, layer thickness and bulk density to see the tonnes of gravel to order.
This calculator is also in the Numnote app for your phone. Google Play
Example
A base of 35 m² with a layer of 14 cm at a density of 1.3 t/m³ needs 6.37 t of gravel.
Gravel in tonnes for a layer of 14 cm at a bulk density of 1.3 t/m³
| base area | layer thickness | bulk density | gravel for a base |
|---|---|---|---|
| 10 m² | 14 cm | 1.3 t/m³ | 1.82 t |
| 20 m² | 14 cm | 1.3 t/m³ | 3.64 t |
| 30 m² | 14 cm | 1.3 t/m³ | 5.46 t |
| 50 m² | 14 cm | 1.3 t/m³ | 9.1 t |
| 80 m² | 14 cm | 1.3 t/m³ | 14.56 t |
In detail
How it is calculated
First the calculator works out the volume of the layer: the area multiplied by the layer thickness converted from centimetres to metres. Then it multiplies the volume by the bulk density, that is the mass of a cubic metre of gravel together with the air between the stones. Gravel is sold by the tonne, and the volume in a truck bed is measured in cubic metres, so the density converts one into the other.
Common mistakes
Compaction is often forgotten: after tamping, the layer settles, so more must be spread than the design thickness shows. Density differs by fraction and rock, and wet gravel is heavier than dry, so check it with the supplier. Type the thickness in centimetres: typed in metres, it makes the result a hundred times smaller.
Questions
How many tonnes of gravel are in a cubic metre?
As many as the bulk density says: it depends on the gravel size and the type of stone, so ask the supplier.
How much gravel do I need for a path?
Multiply the area by the layer thickness in metres and by the bulk density, adding a margin for compaction.