Numnote
English (Ireland)

Gravel calculator in tonnes

Enter the area, layer thickness and bulk density to see the tonnes of gravel to order.

base area
m²
layer thickness
cm
bulk density
t/m³
base aream²×layer thicknesscm×bulk densityt/m³
=7.514t

This calculator is also in the Numnote app for your phone. Google Play

Example

A base of 34 m² with a layer of 13 cm at a density of 1.7 t/m³ needs 7.514 t of gravel.

Gravel in tonnes for a layer of 13 cm at a bulk density of 1.7 t/m³

base arealayer thicknessbulk densitygravel for a base
10 m²13 cm1.7 t/m³2.21 t
20 m²13 cm1.7 t/m³4.42 t
30 m²13 cm1.7 t/m³6.63 t
50 m²13 cm1.7 t/m³11.05 t
80 m²13 cm1.7 t/m³17.68 t

In detail

How it is calculated

First the calculator works out the volume of the layer: the area multiplied by the layer thickness converted from centimetres to metres. Then it multiplies the volume by the bulk density, that is the mass of a cubic metre of gravel together with the air between the stones. Gravel is sold by the tonne, and the volume of a lorry load is measured in cubic metres, so the density converts one into the other.

Common mistakes

Compaction is often forgotten: after tamping, the layer settles, so more must be spread than the design thickness shows. Density differs by fraction and rock, and wet gravel is heavier than dry, so check it with the supplier. Type the thickness in centimetres: typed in metres, it makes the result a hundred times smaller.

Questions

How many tonnes of gravel are in a cubic metre?

As many as the bulk density says: it depends on the gravel size and the type of stone, so ask the supplier.

How much gravel do I need for a path?

Multiply the area by the layer thickness in metres and by the bulk density, adding a margin for compaction.