Concrete slab calculator
Enter the length and width of the slab in feet and its thickness in inches to see how many cubic feet of concrete to order.
This calculator is also in the Numnote app for your phone. Google Play
Example
A slab 10 ft by 12 ft and 4 in thick needs 40 ft³ of concrete.
Volume of concrete for a slab of 10 ft by 12 ft at different thicknesses
| length | width | thickness | concrete for a slab |
|---|---|---|---|
| 10 ft | 12 ft | 3 in | 30 ft³ |
| 10 ft | 12 ft | 4 in | 40 ft³ |
| 10 ft | 12 ft | 5 in | 50 ft³ |
| 10 ft | 12 ft | 6 in | 60 ft³ |
| 10 ft | 12 ft | 8 in | 80 ft³ |
| 10 ft | 12 ft | 10 in | 100 ft³ |
In detail
How it is calculated
The volume of a slab is the length multiplied by the width and by the thickness. The thickness is entered in inches, as it is usually given in a plan, and the calculator converts it to feet itself, so the result comes out in cubic feet; concrete is sold by the cubic yard, twenty-seven cubic feet. The formula is the same for a foundation slab, a floor, a patio or a path.
How to measure it exactly
Measure the formwork from the inside, and measure the thickness in several places. The base is rarely perfectly level, and gravel settling by half an inch over the whole area adds a noticeable volume. Take the largest measured thickness or the mean of many points.
Common mistakes
Ordering exactly as much as the result says leaves you short. Some concrete stays in the mixer and the pump, some goes into the unevenness of the base, so a small margin is usually added. A shortage is worse than a surplus: the joint between two pours weakens the slab. Watch the thickness too: in feet where the field expects inches, the volume comes out twelve times smaller.
Questions
How much concrete do I need for a slab?
Multiply the length by the width and by the thickness in feet. The calculator converts the thickness from inches to feet itself.
How much extra concrete should I order?
Usually a few percent over the calculated amount. Some concrete stays in the equipment and some fills the unevenness of the base, so order a little more than the result shows.