Rectangle area calculator
Enter the length and the width to get the area.
This calculator is also in the Numnote app for your phone. Google Play
Example
A rectangle of 6 ft by 3.5 ft has an area of 21 ft².
Area of a rectangle with a width of 3.5 ft and different lengths
| length | width | area |
|---|---|---|
| 2 ft | 3.5 ft | 7 ft² |
| 3 ft | 3.5 ft | 10.5 ft² |
| 4 ft | 3.5 ft | 14 ft² |
| 5 ft | 3.5 ft | 17.5 ft² |
| 6 ft | 3.5 ft | 21 ft² |
| 8 ft | 3.5 ft | 28 ft² |
In detail
How it is calculated
The area of a rectangle is the length multiplied by the width. This is how you measure the floor of a room, a yard, a countertop or any rectangular surface. Both sides must be in the same units: feet by feet give square feet.
How to measure it exactly
If a room is not rectangular, split it into rectangles, work out the area of each one and add them up. For materials, add a margin: the area shows the bare surface, without offcuts.
Common mistakes
Mixed units are the most frequent slip: multiplying feet by inches, for example, gives a result twelve times too large that means nothing. Square units cannot be converted like ordinary ones either. A square foot holds not twelve square inches but a hundred and forty-four, because each of the two sides grows twelvefold.
Questions
How do I work out the area of a room?
Multiply the length by the width in the same units. Split a room of awkward shape into rectangles and add up their areas.
How many square inches are in a square foot?
A hundred and forty-four, because a foot is twelve inches and an area multiplies both sides.
Should I add a margin for materials?
Yes. The area is the bare surface, and a few percent are usually added for offcuts, as the “Tiles needed” calculator does.