Numnote
English (New Zealand)

Wheel diameter by tyre size calculator

Enter the tyre width, its profile and the rim diameter to see the overall wheel diameter.

tyre width (mm)
aspect ratio (percent of width)
%
rim (inches)
2×tyre width (mm)×aspect ratio (percent of width)%+rim (inches)×25,4
=678mm

This calculator is also in the Numnote app for your phone. Google Play

Example

A 240 mm tyre with a profile of 46% on a rim of 18 inches has a diameter of 678 mm.

Diameter of a wheel with a 240 mm tyre and a profile of 46% for different rims

tyre width (mm)aspect ratio (percent of width)rim (inches)wheel diameter
24046%14576.4 mm
24046%15601.8 mm
24046%16627.2 mm
24046%17652.6 mm
24046%18678 mm
24046%19703.4 mm

In detail

How it is calculated

A tyre size is written as three numbers: the width in millimetres, the profile and the rim diameter in inches. The profile is the sidewall height as a percentage of the width, so the calculator multiplies the width by the profile and takes the sidewall twice, above and below. The rim diameter converted from inches to millimetres is added to this. This way you can compare two tyre sizes before a change.

Common mistakes

The profile is not a height in millimetres but a percentage of the width: the same profile on a wider tyre gives a taller sidewall. Rim inches cannot be added to millimetres without converting. And when changing the size, keep the change of diameter small, otherwise the speedometer and the odometer will read wrong.

Questions

How do I find the wheel diameter from the tyre marking?

Multiply the width by the profile, take it twice and add the rim diameter in millimetres.

What does the letter R in a tyre size mean?

It stands for the radial construction of the tyre, not for the radius. The number after it gives the rim diameter in inches.