Lever force calculator
Enter a force and the two lever arms to see the force needed on the other arm.
This calculator is also in the Numnote app for your phone. Google Play
Example
A force of 200 N on an arm of 0.56 m is balanced by a force of 70 N on an arm of 1.6 m.
Force on the second arm of a lever when the arms are 0.56 m and 1.6 m
| force, N | first arm, m | second arm, m | force on a lever |
|---|---|---|---|
| 40 | 0.56 | 1.6 | 14 N |
| 90 | 0.56 | 1.6 | 31.5 N |
| 180 | 0.56 | 1.6 | 63 N |
| 270 | 0.56 | 1.6 | 94.5 N |
| 450 | 0.56 | 1.6 | 157.5 N |
| 720 | 0.56 | 1.6 | 252 N |
In detail
How it is calculated
A lever is in balance when the first force times its arm equals the second force times its arm. So the calculator multiplies the known force by the first arm and divides by the second. The longer the second arm, the smaller the force it needs, and this is the gain in force, or mechanical advantage.
How to measure it exactly
The arm of a force is the distance from the pivot to the line along which the force acts, not to the end of the lever. If the force is not perpendicular to the lever, the arm is shorter than the distance to the point where the force is applied. Enter both arms in the same units.
Common mistakes
The arm is often measured from the end of the lever instead of from the pivot, and the result comes out wrong. People also forget that a gain in force is a loss in distance: the end of the long arm travels further, so the work does not get any smaller.
Questions
What do I measure the arm from?
From the pivot to the line along which the force acts.
Does a lever reduce the work?
No, it reduces the force but increases the distance, so the work stays the same.